Home Water Filter Systems


When researching home water filter systems, you should first find out what kinds of chemicals your local water contains. In addition, you should also test your water quality in a laboratory. However, there are much easier ways to check the quality of your local water. Here are some of them:

If you’re looking for a water filter system for your home, you should check out the EF3000 home water filter system. It comes with a full-year warranty against defects. During checkout, you can choose the frequency that you want to change the filter. This can be convenient if you’re prone to forgetting to do so. This system is easy to install and has been praised by customers.

Everpure water filtration is so popular, restaurants worldwide use it. Its “Full Flow” system is designed to reduce common contaminants in tap water while still retaining vital minerals. You can choose from three different sizes, each with a different cartridge capacity. When buying your EF3000, make sure you’ll have enough room to install the filter. You can also upgrade to a higher capacity cartridge if needed.
SoftPro Carbon Filter

If you are looking for a carbon filter for your home water filter system, you might want to consider the SoftPro Carbon Filter. This carbon filter doesn’t require backwashing, and it runs off of water pressure. It also comes with a limited lifetime warranty on the tank and valve. It doesn’t need electricity, but it does need to be cleaned with bleach once a year. The filter is also available with four interest-free payments.

The Carbon Filter comes in various sizes and uses catalytic carbon to remove pollutants. These filters are effective at removing chlorine and chloramine, two of the most common contaminants in tap water. The filter also removes heavy metals and herbicides. These filters meet the requirements of NSF/ANSI 61. These filters are made to remove as many contaminants as possible and are safe for home use.

The SoftPro Carbon Filter for home water filter system works well to remove chloramines and chlorine from water. Its activated carbon media is good for homes with 1-3 bathrooms. If you have more than one bathroom, you can purchase an upgrade. This filter is inexpensive and well-built. If you want a system that can treat up to one million gallons of water, you can choose the Home Master 3 stage filtration system.
Pelican whole-house premium filter

The Pelican whole-house premium filter system brings spring-like water through every faucet. With spring-like water, you don’t have to worry about skin rashes or dry mouths. This high-capacity system is easy to install in any home. It even filters chlorine and other pollutants that are present in tap water. Your family will love its fresh, clean water. It even works with the most difficult tap water.

Installation is relatively easy with the Pelican whole-house water filter. Most customers reported that the installation was simple and painless. While some users hired a plumber to install the Pelican whole-house premium filter system, even someone with no plumbing knowledge can install the system. It is also very easy to install, and once installed, it provides fresh water immediately. Just make sure to have an access point in the basement or attic.

A Pelican whole-house premium filter system comes with a copper and zinc KDF filter, which neutralizes chlorine on a chemical level. This ensures great tasting water. Pelican goes to great lengths to test their filters, and the Pelican system has two NSF/ANSI certifications. Certification 42 ensures that the water you’re drinking is free of aesthetic impurities.